Leave Your Message
Precision Engineered Magnetic Systems

Sintered Rare Earth Magnets For Magnetic Assemblies

Empowering Next-Generation Motion, Actuation, and Sensor Technologies with High-Flux Sintered NdFeB & SmCo Sub-Assemblies.

25+
Industry Experience (Since 1999)
100,000 m²
Modern Production Facility
300+
Specialized Engineers & Staff
5,000 Tons
Annual Sintered Magnet Capacity

The Role of Sintered Rare Earth Magnets in Modern Magnetic Assemblies

Engineering complex magnetic circuits to achieve unmatched magnetic force density, thermal stability, and mechanical precision.

1. Engineering Superiority: From Standalone Magnets to Value-Added Assemblies

While standalone sintered Neodymium (NdFeB) and Samarium Cobalt (SmCo) magnets provide exceptional intrinsic magnetic remanence ($B_r$) and coercivity ($H_{cj}$), integrating them into custom magnetic assemblies unlocks an entirely new paradigm of performance. A magnetic assembly integrates permanent rare earth magnets with non-magnetic and ferromagnetic materials (such as mild steel, stainless steel, aluminum, brass, or engineered engineering plastics) to channel, concentrate, and amplify the magnetic flux lines exactly where needed.

By leveraging advanced Finite Element Analysis (FEA) and specialized flux-guiding pole pieces, a well-engineered sintered rare earth assembly can achieve magnetic holding forces and air-gap flux densities up to 300% to 500% higher than an isolated magnet of comparable volume. This eliminates unnecessary rare earth mass, reduces cost, and shields surrounding electronic components from unwanted stray fields.

2. Global Industrial Landscape and High-Tech Market Dynamics

The global transition toward high-efficiency electrification, industrial robotics, intelligent mobility, and clean energy has caused explosive demand for sintered rare earth magnetic assemblies. Contemporary automotive platforms demand integrated sub-assemblies for Electric Power Steering (EPS), drive motors, brake-by-wire actuators, and onboard LiDAR sensors.

Simultaneously, aerospace engineering, industrial automation, and surgical medical devices require sub-micron precision assemblies capable of withstanding extreme vibration, thermal cycles from -40°C to +200°C, and corrosive operating environments. Manufacturers must provide more than raw sintered blocks—they must deliver tightly toleranced, tested, dynamic rotor and stator modules ready for instant integration.

Halbach Array Optimization for Magnetic Assemblies

One of the most powerful implementations in sintered rare earth magnetic assemblies is the Halbach array configuration. By assembling sintered NdFeB segments with spatially rotating magnetization vectors, the magnetic field is augmented on one working side while cancelled almost completely on the opposing side. This spatial flux focus is critical for high-speed brushless DC (BLDC) motors, particle accelerators, magnetic levitation, and magnetic coupling pumps.

Δ

Grain Boundary Diffusion (GBD)

Incorporating Dysprosium (Dy) or Terbium (Tb) through surface grain boundary diffusion maximizes high-temperature coercivity while preserving maximum energy product $(BH)_{max}$ and minimizing rare earth consumption.

∞

Anti-Corrosion Surface Treatments

Multi-layer metallic and barrier coatings including Ni-Cu-Ni, Electroless Nickel, Epoxy, Zinc, Passivation, and Parylene-C ensure long-term resistance to salt spray, humidity, and chemical exposure.

⚙

Tight Mechanical Tolerances

Wire EDM cutting, CNC profile grinding, and automated optical measurement guarantee dimensional accuracies down to ±0.01mm, ensuring flawless balancing in high-RPM dynamic rotor assemblies.

Critical Engineering Application Scenarios

Discover how precision-manufactured sintered rare earth magnetic assemblies power mission-critical hardware across leading global industries.

Automotive Electric Power Steering (EPS) & Braking

Sintered NdFeB arc and ring assemblies are essential for EPS torque sensors and brushless drive motors. They deliver high torque-to-inertia ratios, instantaneous response, and ultra-smooth cogging torque profiles, directly enhancing vehicle safety and autonomous driving feedback loops.

Electric Vehicle (EV) Traction Drive Rotors

Integrated Interior Permanent Magnet (IPM) rotors utilize laminated steel stacks embedded with sintered NdFeB blocks (grades N42SH, N45UH, N38EH). These assemblies endure centrifugal forces exceeding 18,000 RPM while maintaining thermal stability under continuous peak current loads.

Industrial Automation, Servo Motors & Collaborative Robotics

Robotic joints and direct-drive servo assemblies leverage sintered rare earth magnetic rings and multipole arrays for compact form-factors, zero backlash, high positional accuracy, and minimal thermal dissipation.

Voice Coil Motors (VCM) & Optical Image Stabilization

Ultra-thin sintered rare earth magnetic plates coupled with ferromagnetic yoke brackets generate highly uniform planar magnetic fields for rapid voice coil micro-positioning in hard disk drives, laser optics, and camera focus modules.

Magnetic Coupling Systems & Hermetic Pumps

Non-contact magnetic coupling assemblies use paired sintered rare earth magnet rotors to transmit rotational torque through containment shrouds, preventing toxic liquid or gas leakage in chemical, oil & gas, and pharmaceutical pumping systems.

Heavy-Duty Industrial Magnetic Lifters & Grippers

Permanent rare earth magnetic lifters combine high-grade sintered NdFeB cores with cam-activated flux shunting mechanisms, providing failsafe lifting capacities from 100 kg to 5,000 kg without reliance on electrical power.

Material Performance in Magnetic Assemblies

Magnet Material Remanence ($B_r$) Coercivity ($H_{cj}$) Max Operating Temp Assembly Advantage
Sintered NdFeB (High Energy) 1.20 – 1.48 T 900 – 2500 kA/m 80°C – 230°C Maximum torque density, compact packaging, ideal for EV & robotics.
Sintered SmCo (Sm2Co17) 0.90 – 1.15 T 1200 – 2400 kA/m 250°C – 350°C Unbeatable thermal stability and corrosion resistance for aerospace & defense.
Bonded NdFeB Assemblies 0.60 – 0.80 T 700 – 1100 kA/m 120°C – 150°C Complex multi-pole single-piece geometries, low eddy current losses.
About Zhejiang Laysun Magnetics Ltd.

Your Trusted Global Partner in Advanced Magnetic Solutions

Founded in 1999, Zhejiang Laysun Magnetics Ltd. has grown to become a national high-tech leader in manufacturing sintered rare earth magnets and integrated magnetic assemblies. Sprawling across a 100,000 square meter state-of-the-art facility in Suining, Sichuan, our dedicated workforce of 300+ professionals operates automated sintering, slicing, plating, and testing lines capable of producing 5,000 tons of premium rare earth magnets annually.

Our operations are anchored upon four foundational pillars: Quality, Credibility, Technology, and Innovation. We provide full-lifecycle support—from magnetic circuit design and FEA simulation to custom tooling, automated assembly, and dynamic balancing.

Contact Our Engineering Team

Our Journey & Manufacturing Prowess

Founded at the turn of the millennium, Laysun Magnetics has evolved from a visionary regional pioneer into an international Tier-1 supplier. Our fully automated sintering furnaces, hydrogen decrepitation (HD) systems, jet milling units, and automated inspection stations ensure absolute microstructural homogeneity and tight flux distribution batch after batch.

Our Vision for Advanced Magnetic Assemblies

To remain a global beacon of innovation and reliability in the permanent magnet sector. We continuously empower emerging green industries—such as renewable energy generation, autonomous mobility, and industrial automation—with custom magnetic assemblies engineered for maximum longevity and energy efficiency.

Why Choose Laysun Magnetics for Assemblies

Decades of specialized metallurgical knowledge combined with modern assembly technologies deliver unmatched commercial and operational value.

01

25+ Years of Industry Leadership

Two and a half decades of continuous operation provides our engineering team with unparalleled metallurgical know-how and deep application understanding across mission-critical sectors.

02

High-Tech Manufacturing & QA

As a certified national high-tech enterprise, our manufacturing processes integrate automated magnetic flux scanners, Helmholtz coils, CMM dimensional inspection, and salt spray testing.

03

Large-Scale 5,000-Ton Capacity

Our expansive 100,000 m² campus ensures massive volume output, high production flexibility, guaranteed supply chain stability, and competitive volume economics for global OEMs.

04

End-to-End Custom Assemblies

We provide full assembly services: magnetizing after assembly, mechanical bonding with high-performance structural adhesives, laser welding, and dynamic rotor balancing up to grade G1.0.

05

Diverse Industry Application Reach

Our magnetic components and assemblies serve thousands of applications worldwide, including electric vehicles, medical devices, wind turbines, power tools, consumer tech, and heavy lifting.

06

Highly Skilled Technical Workforce

With over 300 skilled technicians, material scientists, and application engineers, Laysun upholds rigorous quality standards from initial prototyping to multi-million piece annual runs.

Industries Powered by Our Magnetic Assemblies

Explore the broad spectrum of high-technology industries leveraging our sintered rare earth magnetic solutions.

Robotics and Automated Actuation Assemblies

Robotics & Automation

Drones and UAV BLDC Motor Assemblies

Drones & UAV Systems

Electric Vehicles Traction and EPS Magnets

Electric Vehicles (EVs)

Power Tool High-Torque Motors

Power Tools

Consumer Electronics Audio and Haptic Assemblies

Consumer Electronics

Smart Home Appliances Inverter Compressors

Home Applications

Global Reach & Certified Quality Management

Headquartered in Hangzhou, China, with extensive worldwide subsidiaries and sales representations to serve our global client base.

Worldwide Offices and Service Network

Quality & Management Certificates

Explore Our Full Range of Sintered Magnet Assemblies

Browse our extensive catalog of specialized permanent magnets, engineered rings, blocks, and heavy lifter assemblies.

Multi-Poles Ring Magnets Made of Bonded NdFeB

Multi-Poles Ring Magnets Made of Bonded NdFeB

Learn More →
NdFeB Magnet Lifter - 1000KG Lifting Capacity with Strong Neodymium Magnets

NdFeB Magnet Lifter - 1000KG Lifting Capacity

Learn More →
Neodymium magnets for voice coil motors

Neodymium Magnets for Voice Coil Motors (VCM)

Learn More →
Super Strong Custom Ring Neodymium Magnet

Super Strong Custom Ring Neodymium Magnet

Learn More →
Permanent NdFeB Magnet Block Neodymium Magnet with Nickle Plating

Permanent NdFeB Block Magnet with Nickel Plating

Learn More →
Strong Magnet Neodymium Magnetic Materials

Strong Magnet Neodymium Magnetic Materials

Learn More →
Permanent Ring Strong Neodymium Magsafe Magnet

Permanent Ring Strong Neodymium MagSafe Magnet

Learn More →
High Quality Permanent Cylinder Neodymium Magnet

High Quality Permanent Cylinder Neodymium Magnet

Learn More →
View All Products in Catalog
Partner with Zhejiang Laysun Magnetics Ltd.

Partner With Us For Advanced Magnetic Assemblies

Join us in our journey towards a magnetically empowered, energy-efficient future. At Zhejiang Laysun Magnetics Ltd., we collaborate with your engineering team from initial magnetic circuit simulation to serial manufacturing, delivering world-class magnetic performance with certified reliability.

Get a Custom Quote Today