
Professional NdFeB Magnets Manufacturer and Sales Center
High Quality
High Performance
Technology Support
In modern electromechanical engineering, the transition toward ultra-compact, high-power-density, and energy-efficient rotating machinery has elevated the strategic role of permanent magnets. Among various geometric topologies, the disc magnet for motor rotors has emerged as a cornerstone in axial flux permanent magnet (AFPM) machines, pancake brushless DC (BLDC) motors, precision gimbal drives, and micro-steppers. Unlike traditional radial cylindrical or arc-segment magnets, disc magnets offer an optimized surface-area-to-volume ratio, facilitating high axial magnetic flux concentration while drastically lowering structural rotor inertia.
Permanent magnet motor rotors utilizing sintered Neodymium-Iron-Boron (NdFeB) disc magnets enable direct-drive capabilities that eliminate mechanical transmission losses. By arranging disc magnets in alternating magnetic orientations or advanced multi-pole configurations—such as planar Halbach arrays—motor designers achieve sinusoidal air-gap flux density distributions. This optimization drastically suppresses total harmonic distortion (THD), reduces cogging torque, and delivers smooth, vibration-free torque even at ultra-low speeds or extreme rotational velocities exceeding 50,000 RPM.
High remanence ($B_r$ up to 1.48 T) delivers intense axial flux linkage, creating high continuous torque density in thin-profile motor envelopes.
Precise dimensional tolerances ($\pm0.02\text{ mm}$) and uniform magnetic orientation reduce harmonic detent torques for ultra-smooth servo actuation.
Available in SH, UH, EH, and AH grades engineered to resist thermal demagnetization at sustained temperatures reaching up to 220°C.
The operational environment inside high-speed motor rotors imposes severe thermal and electromagnetic stresses. Under continuous pulse-width modulation (PWM) inverter switching, eddy currents can induce local heat generation within the rotor assembly. If the intrinsic coercivity ($H_{cj}$) is insufficient, irreversible demagnetization can occur, degrading motor efficiency and torque output.
To overcome this challenge, modern disc magnets for motor rotors utilize Grain Boundary Diffusion (GBD) technology. By diffusing heavy rare-earth elements such as Dysprosium (Dy) or Terbium (Tb) selectively along the grain boundaries rather than throughout the entire crystal matrix, the magnet achieves ultra-high intrinsic coercivity ($H_{cj} \ge 35\text{ kOe}$) while conserving remanence ($B_r$) and substantially reducing dependency on scarce materials. This allows disc magnets to maintain magnetic stability under severe demagnetizing fields caused by sudden phase short-circuits or transient motor overloads.
| Magnet Profile & Grade | Remanence ($B_r$, T) | Coercivity ($H_{cj}$, kOe) | Max Operating Temp | Primary Rotor Applications |
|---|---|---|---|---|
| N52 Disc Magnet | 1.43 – 1.48 | ≥ 11.0 | 80°C | Consumer drones, gimbal cameras, miniature RC actuators |
| N45SH Disc Magnet | 1.32 – 1.38 | ≥ 20.0 | 150°C | Industrial servo drives, robotic joint actuators, medical pumps |
| N40UH / N38EH Disc | 1.22 – 1.30 | ≥ 25.0 – 30.0 | 180°C – 200°C | Axial flux EV traction sub-assemblies, aerospace gimbals |
| N35AH Disc Magnet | 1.17 – 1.23 | ≥ 35.0 | 220°C | High-temperature downhole motors, automotive EPS motors |
The versatility of sintered neodymium disc magnets makes them indispensable across cutting-edge industrial automation and mobility platforms:
Axial Flux Traction & Direct-Drive Wheels: In lightweight electric vehicles, e-bikes, and automated guided vehicles (AGVs), dual-rotor axial flux motors configured with high-coercivity disc magnets deliver superior torque-to-weight ratios compared to radial configurations. Disc magnets mounted on composite or stainless carrier discs reduce iron losses and streamline compact planetary gear integration.
Collaborative Robotics & Exoskeleton Joint Actuators: Cobots require frameless torque motors with minimal axial length. Multi-pole disc magnet arrays allow joint actuators to deliver explosive peak torque within arm joints without thermal throttling, ensuring millimetric positional accuracy and rapid responsiveness.
Drone Propulsion & High-RPM UAV Motors: Drone propulsion systems demand extreme thrust-to-weight metrics. Ultra-light disc magnets provide high magnetic flux linkage while lowering dynamic inertia, allowing brushless electronic speed controllers (ESCs) to adjust RPM instantly for stable aerodynamic flight control.
Precision Surgical & Medical Devices: In autoclavable surgical power tools, insulin micro-pumps, and dental handpieces, disc magnets coated with biocompatible Parylene or multi-layer electroless nickel withstand chemical sterilization cycles while delivering quiet, ultra-low cogging operation.
Dynamic centrifugal forces in high-RPM rotors can exceed thousands of Gs. Securing disc magnets against detachment and maintaining dynamic balance are critical design factors. Engineers frequently employ precision-machined rotor pockets, carbon-fiber outer retaining sleeves, and structural aerospace-grade epoxy adhesives to guarantee structural integrity.
Furthermore, Neodymium is inherently prone to atmospheric oxidation. Our motor rotor disc magnets undergo advanced multi-tier plating and coating procedures:


Your trusted global partner in advanced magnetic solutions. Since our inception in 1999, Zhejiang Laysun Magnetics Ltd. has evolved into a national high-tech leader in the research, development, and manufacturing of high-performance rare earth NdFeB permanent magnets.
Our state-of-the-art facility, sprawling across 100,000 square meters in Suining, Sichuan, operates with a dedicated team of over 300 professionals. Equipped with advanced vacuum induction melting furnaces, hydrogen decrepitation (HD) systems, jet milling units, and automated slicing lines, we achieve an impressive 5,000 tons annual capacity of high-grade magnets serving Tier-1 motor and tech clients worldwide.
Contact Engineering TeamFounded in 1999, our two-decade background ensures in-depth expertise in magnetic circuit design, pole orientation optimization, and rotor torque calculation.
Recognized as a national high-tech enterprise, our automated production lines maintain micrometer-level mechanical tolerances and strict flux consistency across every batch.
With an annual capacity of 5,000 tons, we provide reliable, scalable supply chains that mitigate rare-earth price volatility for large automotive and OEM contracts.
Our permanent rare-earth solutions empower electric vehicle drivetrains, industrial servomotors, acoustic transducers, computer hardware, and smart IoT actuators.
Built upon the core pillars of Quality, Credibility, Technology, and Innovation, our ISO-certified quality assurance delivers zero-defect consistency.
A technical staff of 300+ specialists supports custom magnetics R&D, rapid prototyping, finite element analysis (FEA), and magnetic circuit modeling.






Join us in our journey towards a magnetically empowered future. At Zhejiang Laysun Magnetics Ltd., we are more than just a manufacturer; we are your strategic partner in optimizing electromagnetic efficiency, reducing weight, and driving next-generation motor designs.
Contact Us Now →