
Professional NdFeB Magnets Manufacturer and Sales Center
High Quality
High Performance
Technology Support
Picking the right magnetizing process is one of those decisions that can really make or break a component—it impacts performance, how fast you can produce parts, and even how inspection goes. If you’re comparing suppliers in China, you’ll run into a lot of Magnetization techniques, and this guide is here to help you sort through them. Nothing too theoretical—just the practical stuff: what each method actually does, what equipment it requires, and the questions you should be asking before you commit to an order.
So, you’ve got a few common routes here: pulse magnetization, capacitor-discharge systems, and fixtures set up for axial, radial, or multipole patterns. Basically, a pulse unit zaps a quick, high-current burst through a coil or fixture. And the fixture’s shape—plus where it makes contact—can really change the field you end up with. The little things count, honestly. The magnet material, part size, and the magnetic pattern you’re aiming for all factor into which process makes sense. What works for one component might totally miss the mark for another.
To get a fair comparison, you really need to ask suppliers for the full picture—process specs, fixture details, sample measurements, repeatability data, the works. Hall probes or gaussmeters are handy for checking field strength and distribution, but keep in mind the readings can shift depending on where you place the probe and what the test conditions are. So don't just take the final number; ask how they measured it. That part's easy to miss. And while you're at it, make sure the trials are run on parts and equipment that actually represent production. A shiny, hand-polished sample might look great, but it won't necessarily tell you what you'll get day to day. Honestly, there’s no one-size-fits-all technique here. You definitely want to double-check whatever suppliers claim. In the next sections, we’ll compare ten different approaches and get into the real trade-offs, so you can make a smarter, more grounded decision.
When comparing Magnetization Techniques, buyers should read the magnetic-property terms carefully. IEC 60404-5 provides methods for measuring permanent magnet properties, including the demagnetization curve. Br, or remanence, is the magnetic flux density remaining when the applied field returns to zero after the specimen has been magnetized. It is commonly reported in tesla. The magnetization history matters.
Hcj is intrinsic coercivity: the reverse field strength at which intrinsic magnetic polarization falls to zero. It is not the same as Hcb, where magnetic flux density B reaches zero. Both values are usually expressed in kA/m, but they describe different points on the curve. A datasheet that lists “coercivity” without specifying which value deserves a closer look.
(BH)max is the maximum energy product, found on the second quadrant of the demagnetization curve. It is expressed in kJ/m³ and helps indicate how much magnetic energy a material can provide in a given volume. Measurement conditions, specimen geometry, and adequate magnetization can affect comparisons. Check that suppliers use comparable test methods and report units clearly. Small differences may reflect setup, not material quality alone. Buyers should verify the details rather than rely on a single headline number.
Buyers should specify the pole pattern, not just request “magnetization.” These ten patterns cover common designs: axial two-pole, axial multipole, diametric two-pole, diametric multipole, inward radial, outward radial, alternating radial multipole, concentric ring poles, skewed or helical poles, and custom asymmetric poles. Axial poles face the flat ends; diametric poles cross the cylinder’s side. Radial patterns direct flux toward or away from the center. Multipole layouts place several north-south pairs around a face or circumference. Small details matter. A two-pole ring may suit a simple coupling, while a multipole ring needs pole pitch matched to the sensor or rotor.
These are pole-pattern specifications, not ten distinct production processes. Most parts are magnetized with a pulse field and a fixture shaped to create the required pattern. Ask suppliers for a pole map, measurement location, and acceptable field variation. For a radial ring, request the field direction at several points around its inner and outer surfaces. A drawing alone can still mislead. USGS Mineral Commodity Summaries 2025 estimated 2024 global rare-earth mine production at 390,000 metric tons of rare-earth-oxide equivalent, including 270,000 tons from China. That supply context makes material traceability worth checking, but it does not predict magnet performance. Specify the required field strength and operating temperature separately; pole count by itself is not enough.
China’s magnetization choice should match the part’s geometry, grade, and required pole pattern. The IEA’s Global Critical Minerals Outlook 2024 estimates that China produced about 94% of the world’s sintered Permanent Magnets in 2023. That concentration makes process consistency an important sourcing question, not just a machine specification. Ask suppliers for repeatable field-strength readings and sample-part results. Small details matter.
DC magnetization provides a steady field and suits simpler parts, such as axially magnetized discs. Pulse magnetization applies a brief, strong field, useful when a high-coercivity magnet needs substantial magnetizing force. Capacitor-discharge systems are a common way to generate that pulse; they are not a separate field pattern, but a power-delivery method. Rotating-field magnetization suits rings or assemblies requiring multiple poles around a circumference. Not interchangeable. Compare fixture design, coil temperature limits, and cycle-to-cycle variation before choosing. A practical caution: a stated peak current alone does not prove the part reached its required magnetization. Request measured results on the actual geometry. Even a carefully selected process can disappoint if the fixture leaves an air gap.
China Top 10 Magnetization Techniques for Buyers
Choose Fixture Geometry by Pole Pitch, Air Gap, and Magnet Dimensions
A magnetizing fixture must match the part, not just the target field. Set pole pitch to suit the magnet’s width and the required number of poles. Keep the working face close: coatings, carrier plates, and positioning clearance all add to the air gap. Small gaps matter. Halbach’s published analysis of multipole magnets shows that a periodic field’s first spatial harmonic falls approximately as e^(-πg/p), where g is the gap and p is pole pitch. In practical terms, doubling the gap can sharply weaken the field reaching the magnet. This is a useful design estimate, not a substitute for testing.
Check magnet length, width, thickness, and corner shape against the fixture’s active area. A long part may need a longer pole face to avoid weak ends; a thin part may need closer pole spacing for consistent through-thickness magnetization. IEC 60404-5:2015 sets out measurement methods for permanent-magnet properties, supporting verification rather than relying on fixture calculations alone. Record field strength at the part location, then test sample magnets across the actual tolerance range. One detail is easy to miss: a fixture that works on a bare sample may underperform once a protective layer or locating gap is added. The model helps, but real assemblies can be less tidy.
| # | Magnetization Technique / Fixture | Typical Magnet Geometry | Pole Pitch Considerations | Air Gap and Fixture Fit | Dimension and Design Checks | Best Fit and Limitations |
|---|---|---|---|---|---|---|
| 1 | Axial, two-pole magnetization | Discs, cylinders, and rings magnetized through their thickness or length | Two opposite poles; multipole pitch is not applicable. | Use opposing pole faces that cover the active magnet area. Keep the working gap as small and consistent as the loading and insulation arrangement permits. | Check diameter or outside diameter, inside diameter, thickness, flatness, and alignment with the pole faces. | A common choice for simple two-pole parts. Thick or large-section magnets may require a higher magnetizing field and a suitably designed coil or fixture. |
| 2 | Diametric, two-pole magnetization | Rod-shaped or cylindrical magnets with poles on opposite sides of the curved surface | Two poles around the circumference; a multipole pitch does not apply. | Orient the fixture to create a field across the diameter. Center the magnet to avoid an uneven effective gap. | Specify diameter, length, orientation, and any shaft, sleeve, or carrier that remains in place during magnetization. | Useful when the required north and south poles are on opposite sides of a cylinder. Fixture alignment is important for repeatable pole orientation. |
| 3 | Axial multipole face magnetization | Discs, rings, and flat components with multiple alternating poles on a face | Define pole count and pole-center spacing on the active face. For a circular pattern with evenly spaced poles, approximate circumferential pitch as π × mean diameter ÷ number of poles. | Small, uniform spacing between the magnet face and pole piece helps produce a consistent field pattern; account for coatings and protective layers. | Provide inner and outer diameters, thickness, pole count, pole pattern, and the required angular position of the pole pattern. | Suitable for rotary components requiring multiple poles on an end face. The fixture must match the specified pole pattern and part dimensions. |
| 4 | Radial multipole magnetization | Rings and cylindrical assemblies with alternating poles around the circumference | For evenly spaced poles, approximate arc pitch at the specified reference diameter as π × reference diameter ÷ number of poles. State the reference diameter and total pole count. | Use a concentric fixture with controlled radial clearance. Eccentricity changes the local gap and can affect pole uniformity. | Check inner and outer diameters, wall thickness, axial length, concentricity, and whether poles are required on the inner or outer surface. | Used for radial-flux designs and multipole rings. The required field and fixture geometry depend on material, section thickness, and pole spacing. |
| 5 | Segmented pole-piece fixture | Arc segments, curved blocks, and parts arranged around a rotor or stator | Set segment width and pole-piece spacing to the design pole pitch. Include assembly gaps when evaluating the magnetic pattern. | Match the curvature and seating surface to the component. Uneven seating or a changing gap can produce inconsistent results between segments. | Specify arc angle, inner and outer radius, segment thickness, axial length, and the intended assembly position. | Practical for shaped components that are magnetized individually or in a dedicated arrangement. Handling and orientation controls are important. |
| 6 | Linear alternating-pole fixture | Bars, strips, and flat blocks with alternating poles along a line or surface | Define pitch as the center-to-center distance between successive poles, and specify whether adjacent poles alternate in polarity. | Maintain a consistent face-to-fixture gap along the full active length. A flat, well-supported setup helps avoid local spacing changes. | Check active length, width, thickness, pole count, end margins, and the position of the first pole relative to the part edge. | Suitable for linear encoders, magnetic strips, and other patterned parts. The fixture should be designed for the full pole pattern, not only the total part length. |
| 7 | Through-thickness plate magnetization | Plates, blocks, and rectangular magnets magnetized between broad faces | Usually a single pole pair through the thickness; use a multipole fixture if multiple alternating regions are required. | Make the pole-face coverage and contact arrangement suitable for the plate footprint. Minimize unintended spacing caused by supports or coatings. | Provide length, width, thickness, corner details, material grade, and the required magnetization direction. | A straightforward geometry for single-direction magnetization. Field penetration and fixture capacity must be assessed for thicker sections and larger parts. |
| 8 | Custom coil or solenoid fixture | Long rods, bars, and components magnetized along their length or axis | Generally used for a two-pole or uniform axial direction; it is not inherently a multipole-pitch solution. | Position the component consistently within the coil’s effective field region. Account for coil bore, insulation, and loading clearance. | Check part length and cross-section, coil opening, insertion depth, and the required field direction. | Can suit elongated parts and axial magnetization. Coil design and pulse conditions must be matched to the magnet material and dimensions. |
| 9 | Magnetization in an assembled magnetic circuit | Magnets installed in a rotor, stator, housing, or other assembly before magnetization | Set pole count and pitch from the complete assembly drawing, including the angular relationship between components. | Evaluate the total magnetic path, clearances, nearby steel, and access for the fixture. Assembly geometry can alter the field distribution. | Provide assembly dimensions, material of adjacent parts, magnet location, retention features, and required pole orientation. | Useful when individual parts are difficult to handle or when the final assembly requires a defined pole pattern. Requires assembly-specific fixture engineering. |
| 10 | Capacitor-discharge pulse magnetization | Used with suitable coils or fixtures for many hard permanent-magnet geometries | The pulse source does not define pole pitch; the coil and pole-piece arrangement determines the field pattern. | Fixture spacing, coil position, and part alignment must be controlled. Electrical insulation and safe clearance are essential. | Confirm magnet material, dimensions, required magnetization direction, coil compatibility, and the supplier’s specified pulse conditions. | A widely used method for producing a short, strong magnetizing pulse. Required pulse conditions are material- and fixture-dependent and should be established through engineering validation. |
Selection note: There is no universal air-gap value or magnetizing-field setting for every magnet. Final fixture dimensions and pulse conditions depend on magnet material, part geometry, pole pattern, coil design, and the required magnetic performance. Confirm the proposed setup with a magnetization-system supplier and verify the result by measurement.
Choosing a magnetization technique starts with the field required at the part, not a magnetizer’s headline rating. Compare the available pulse field with the magnet’s Hcj, or intrinsic coercivity, at the relevant temperature. Hcj describes resistance to reverse magnetization; it is not a universal machine setting. Shape, alignment, fixture gaps, and field uniformity all affect whether a magnet reaches saturation. Small gaps matter.
One tesla equals 10,000 gauss (G). So a 1.5 T reading equals 15,000 G, provided both readings describe the same quantity and location. Do not compare Hcj in kA/m directly with a flux-density value in tesla: magnetic field strength and flux density are related, but not interchangeable. Ask suppliers where their field figure is measured, and check whether it applies across the workpiece or only near a coil. A neat specification can still hide that difference.
When reviewing China Magnetization Techniques, request the pulse-field profile, fixture details, and test method alongside the peak rating. A thicker or oddly shaped part may need a different coil arrangement than a flat sample. I would treat calculations as a starting point, not proof; real parts can behave less neatly than drawings suggest. Test representative pieces and inspect them after magnetization.
For OEM Magnetization Techniques, a test certificate is only useful when its method is clear. Ask suppliers to identify whether measurements follow GB/T 3217-2013 or IEC 60404-5. These standards address magnetic-property measurement, but buyers should not assume results are directly interchangeable. Check sample dimensions, magnetization direction, temperature, and instrument calibration.
Request the hysteresis data, not only a pass mark. Remanence (Br), coercivity (Hcb), and intrinsic coercivity (Hcj) help show whether a magnetization process suits the application. Ask for the applied field and measurement uncertainty, too. Small setup differences matter. A neat certificate can still conceal inconsistent sample preparation.
The USGS Mineral Commodity Summaries 2025 estimates global rare-earth production at 390,000 metric tons in 2024, including 270,000 metric tons from China. That supply scale makes repeatable incoming checks practical, not ceremonial. Compare supplier results with a reference sample measured under documented conditions. Some details get missed. Keep raw curves and lot numbers; reviewing them may reveal variation that a single headline value hides.
Compare ten magnetization setups by the full production cycle, not pulse duration alone: capacitor-discharge impulse, controlled DC, single-pole, multipole, axial, radial, yoke, rotating-field, contact-coil, and in-situ magnetization. An impulse may last milliseconds, but loading, alignment, and checking often take longer. DC exposure typically takes longer; its slower ramp can help when operators need to control field strength. Multipole and dedicated axial or radial fixtures can give repeatable results at volume, but custom tooling raises upfront cost. Yokes and contact coils are simpler to trial, though part positioning can vary. Rotating-field and in-situ methods suit particular geometries, yet may need more setup and validation.
The IEA’s Global Critical Minerals Outlook 2024 reports that China supplies roughly 90% of refined rare earths, a reminder that sourcing and process capability deserve equal attention. For repeatability, IEC 60404-5:2015 provides methods for measuring permanent-magnet properties; it does not prescribe universal cycle-time benchmarks. Ask suppliers for measured cycle time, field uniformity, and part-to-part variation from your own geometry. Custom Magnetization Techniques should be tested with production-intent samples, not only ideal lab pieces. A polished fixture can still hide weak spots.
Tips: Record pulse settings, fixture temperature, and verification results across a full shift. One missed alignment matters. Treat quoted cycle times as estimates until a trial confirms them.
Name the pattern, not just “magnetization.” Common options include axial, diametric, radial, multipole, and custom layouts.
Axial poles face the flat ends. Diametric poles cross the cylinder’s side. Easy to confuse.
Flux points toward or away from the center. For a ring, request field directions at several points on its inner and outer surfaces.
They place several north-south pairs around the circumference. Match pole pitch to the sensor or rotor.
Alternating radial, concentric, skewed, helical, and asymmetric layouts may need detailed pole maps. A drawing alone can mislead.
DC can suit simpler parts, such as axially magnetized discs. Strong pulses can help with high-coercivity magnets. Rotating fields suit circumferential multipole patterns.
No. It delivers a brief, strong pulse. The fixture creates the pole pattern.
Ask for a pole map, measurement locations, field strength, field variation, and sample-part results. Peak current alone proves little.
Include loading, alignment, magnetizing, and checking—not pulse duration alone. Record fixture temperature and results across a full shift.
Custom fixtures may raise upfront costs. Air gaps or missed alignment can weaken results. A production-intent trial is wiser than trusting estimates.
This guide explains how buyers can evaluate Magnetization Techniques using IEC 60404-5 terminology, clarifying remanence (Br), intrinsic coercivity (Hcj), and maximum energy product ((BH)max). It organizes ten approaches by the pole patterns they produce, including axial, diametric, radial, and multipole arrangements, then compares pulse, capacitor-discharge, DC, and rotating-field methods. The aim is to help match a process to the magnet’s intended geometry and application rather than select equipment by name alone.
Practical selection depends on fixture shape, pole pitch, air gap, and magnet dimensions. Buyers should also check that the applied field is sufficient in relation to Hcj; for unit conversion, 1 tesla equals 10,000 gauss. When reviewing Chinese supplier test data, compare procedures and results with GB/T 3217-2013 and IEC 60404-5. Finally, assess cycle time, repeatability, and total cost across the ten methods to identify a reliable, suitable option.